The Testing Times

We have designed a range of grips for use in the medical market. The grips are manufactured from high quality stainless steel and every part is passivated. Each grip was immersion tested for 48hours in 0.9% saline at 37 deg C. After this they were stripped down and inspected for any signs of corrosion rusting or mould growth. Once satisfied that the immersion test had passed, we proof loaded the grips. Every grip in the medical range is clearly marked with a grip reference number and a max load rate.

Here at Tinius Olsen the engineers have designed yet another custom grip attachment. Two version of the new high temperature compression cages for use in an environmental chamber . Part numbers 270 032 & 270 033. The Compression cages are rated at 25kN and 50kN, and can be tested at temperatures between -70 to +200 degrees C. They are designed to test the largest possible samples that can be tested in the Environmental chamber . As sample with maximum size of 100mm wide x 200mm deep x 200mm high. For more information contact us.

This is a 300 kN Self Aligning fitting designed for Tension testing applications only. It has an M36 lower and an M42 Upper bolt - to fit to the machine. The fitting to fitting to which you would attach the grips is M36. It meets the requirements of ASTM E8 Standard test method for tension testing metallic materials. It may also be used when working to ASTM E21-03a Elevated temperature tension tests.